Drivers and front-seat passengers are usually at the mercy of the windscreen. If a windshield is damaged or faulty in any way, the chances are high that a driver and the front passenger will be exposed to external elements. Therefore, any windscreen damages should be repaired as soon as possible. Notably, you should not worry about windscreen repairs performed by a professional technician because they usually hold well. However, DIY repairs might need a professional touch. This post highlights telltale signs that DIY windscreen repairs require a professional touch.

Rattling Windscreen — Once you get a car from the garage, you can drive it home knowing that the windscreen is in good condition. Typically, a professionally repaired windscreen should hold tight against a car's frame. Therefore, if you hear a windscreen rattling a few days after repairs, you should take it back to a garage. You are most likely to hear the rattling noise when you drive over rough terrain, bumps or potholes. In most cases, a rattling windscreen is caused by poor adhesive contact. Even if an adhesive feels dry to the hand, it does not mean adequate curing. You need to follow manufacturer guidelines for a windscreen adhesive to cure properly.

Water Leaks — Whether you take a car for windscreen crack repairs or deteriorating adhesive, the main objective is to keep water from leaking inside the cabin at all costs. Luckily, you can use a windscreen DIY repair kit to mend minor blemishes, such as cracks and loose seals. However, water will start leaking into the cabin if you do a poor job, making your repair efforts futile. In this regard, you should take a windscreen for professional repairs if you notice water coming through the seal or cracks. If you wait longer than necessary, the water leaks will loosen the seal, making a windscreen loose. Professional auto glazers understand the right adhesives to use on windscreen cracks and seals to prevent water from seeping into your vehicle.

Unscraped Old Adhesive — If your windscreen appears to sit loosely on its frame, the best remedy is to remove the entire windscreen and apply a fresh coat of adhesive so that the windshield holds firmly. However, if you are a DIY enthusiast like most motorists, the immediate solution would be squeezing an adhesive into the loose sections and holding it down until it cures. Unfortunately, most motorists apply the new adhesive over the old resin, rendering the former ineffective. A professional technician will scrape away all the old adhesive to allow the new resin to set, cure, and hold a windscreen tight.

For more information on windscreen repair, contact a company near you.

Share